Feature:
- AP, Bridge, Client, Repeater functions
- WISP Client Router mode
- WISP + Universal Repeater Mode
- Detachable Antenna, 2 LAN ports
- 802.1x, WPA, WPA2 and Web Mgt.
- TX power regulation in 4 levels
- Watchdog function use PING
- Wireless Client Isolation (e8 firmware)
- ACK Timeout Adjustment
- DHCP Relay function
- 802.11g Protection
Hardware:
2x 10/100Mbps LAN Port
2MB Flash, 16MB SDRAM
Reversed SMA Antenna Port
Power, LAN, WLAN LED indicators
Antenna :
2 dBi detachable Dipole Antenna
Reversed SMA Connector
Frequency Range:
USA (FCC) 11 Channels: 2.412GHz~2.462GHz
Europe (ETSI) 13 Channels : 2.412GHz~2.472GHz
Japan (TELEC) 14 Channels :2.412GHz~2.483GHz
Modulation Technique:
11g Orthogonal Frequency Division Multiplexing (64QAM,
16QAM, QPSK, BPSK)
11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Data Rate:
54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps
Output Power:
18dBm
Adjustable in 4 levels
WISP Mode
DHCP, PPTP, L2TP, PPPoE ISP Authentication Support
Wireless Client function as WAN
WISP mode is not the same router mode
To configure the WISP mode, you PC must be connected
to the LAN port
Security:
64/128-bit
802.1x Radius Support
WPA/WPA2-PSK support
WPA Enterprise support in AP/WDS mode
Configuration:
Web Management
WDS (Bridge, Client, Repeater) mode
Hide ESSID
802.1x
MAC Access Control
MAC Access Table
Wireless Client Isolation (e8 firmware)
SSID, Channel, RTS Threshold, Frag Threshold
Environmental
Operating temperature: 0~60?
Operating humidity (non-condensing): 20~80%
Storage temperature: -20~65?
Storage humidity: 95% Max
Power Supply
DC12V
Dimension and Weight
135 x 100 x 26mm
180 g
EMI
FCC, CE
|